ACCESSORIES AND OPTIONS:

RETAINING PIN

Extruded aluminum shelves are designed to be compatible with Rakks Style shelf brackets and retaining pins. The front stiffener leg of the shelf lines up behind the retaining pin in all shelf depth configurations. When using aluminum shelves with wall mounted standards and brackets, retaining pins should always be specified to keep the shelves from separating or sliding forward.

SHELF LIP BRACKET

This Rakks Style bracket allows aluminum shelves to be used for literature and other product display in a slanted configuration. Two-inch hangbar/stiffener secured in the notched brackets, retains the shelf and creates an attractive lip. Available in any angle and all shelf depths.

SHELF SPLINE
Used to align extruded aluminum shelf sections to create a continuous shelf in excess of 12 feet. Extruded aluminum spline fits securely into shelf bottom joining sections and keeping them in alignment. Note: Shelves must always join at a bracket. Finish: Clear anodized aluminum.

SHELF HOLD DOWN CLIP
Used to attach Rakks extruded aluminum shelves to a Rakks Style shelf support bracket so that they cannot be easily removed. Hold down clips should also be used when the end of the shelf does not extend very much beyond the bracket and might slide off. The hold down clip is secured to the shelf with a setscrew from the bottom and secured to the bracket with a setscrew from the side. When using shelf hold down clips, it is not necessary to order retaining pins. Finish: Clear anodized aluminum.

LABEL HOLDER
Attaches to the front edge of SA-06 and SA-04 aluminum shelves using a hidden thumbscrew. Holds 1/2" tall labels. Lengths as specified. Model SA-LBL.

SLIDING BOOKEND
These adjustable bookends integrate into the base of the aluminum shelves and can be secured at any point along the shelf with a thumbscrew. Use with surface mounted standards or with pole applications having clearance at the back of the shelf. Sliding bookends are available in two sizes - 8 1/2" and 6"